How to Effectively Use Mechanical Keyboard Key Remover?

Confused About Removing Your Keyboard Keys? Here’s How You Can Do It Effectively with a Mechanical Keyboard Key Remover.

How difficult can it be to pluck some keys out of a mechanical keyboard? Removing keys from your mechanical keyboard is not difficult at all. However, you might want to make sure that you are using the appropriate tool- A mechanical keyboard key remover- with the right trick. Ensuring these two things will help you take the keycaps out quickly. And will eliminate the risk of scratching the paint of the keys or damaging their switches.

You May Also Read: How to Replace Keyboard Keys using a Keyboard Key Puller?

Is There a Difference Between a Normal Keyboard and a Mechanical Keyboard?

Since you are looking for ways to remove mechanical keyboard keys effectively, you probably already know that a mechanical keyboard is different from the keyboards we use every day, as our laptop keyboards.

Mechanical keyboards are the keyboards that came with desktop computers a few decades ago. However, because they were expensive, computer manufacturers replaced them with a cheaper alternative-the rubber dome keyboards that we use today.

The thing that differentiates the mechanical keyboard from its successor is the switch on the keyboard. Mechanical keyboards have a different ‘mechanical’ switch beneath each key. As their name suggests, rubber-dome keyboards have rubber domes that deform and complete the keyboard circuit to register the keypress.

What Is A Mechanical Keyboard Key Remover?

We mentioned that there is a ‘right tool’ for removing the mechanical keyboard keys. This tool is the Mechanical Keyboard Key Remover or a keycap puller. It’s all in its name. A mechanical keyboard key remover is a manual tool that helps you pluck out the keys from your mechanical keyboard without damaging the keycap’s paint or the keyboard’s switch.

In other words, this tool will remove your keyboard’s keys without taking away its life.

Types of Mechanical Keyboard Key Remover

There are many different types of mechanical keyboards, and hence a little variety appears in the keyboard’s keycap removers.

Plastic keyboard Key Remover

The plastic keyboard key remover is the most common type of mechanical keyboard key remover. These keycap pullers have a ring with two prongs molded on it.

To remove the keycaps using plastic keyboard key remover, you place the prongs over the key you wish to remove and apply a little force on the key. The prongs will slide down along the keycap sides and hold on to the edge of the key underside. Once it is fixed in its place, all you have to do is pull on the keycap, and it will come out easily.

Plastic keyboard key remover is the easiest to use and is only a little over a dollar. However, since its prongs slide down along the keycaps, chances are they may scratch off the paint from your keys.

So, while being easy to use, plastic keyboard key removers run a risk of damaging your keycaps, which shouldn’t be an issue if you are replacing your keyboard’s keys.

Wire Keyboard Key Remover

The wired or metal keyboard key remover is often the mechanical keyboard enthusiasts’ favorite. This type of keycap puller is the best choice for removing keys. Because they don’t damage the keys while removing them, unlike their plastic counterparts. Moreover, unlike plastic key pullers that remove one key at a time, wired pullers can remove up to 4 keys in one go.

The wired keyboard key remover is made of metallic wires that are attached to a plastic handle. To remove keys using this type of key remover, all you have to do is open the keycaps tongs and enclose the keys you want to remove between the two prongs and then pull. This way, the keycaps should come off quickly.

However, the wired key pullers, while still being very inexpensive, cost a little more than the plastic ones. But you can still easily get yourself a metal key puller at around $5.

How to Effectively Use a Mechanical Keyboard Key Remover?

·        Pick the Right Keycap Puller

To effectively remove keys from your keyboard, you must pick a mechanical keyboard key remover that’s right for your keyboard. And apart from being right for the keyboard, it must also be easy to use for you.

·        Remove the Keyboard from Its Port

Before you start removing your keyboard keys with a mechanical keyboard key remover, make sure you remove the keyboard connector from its port.

Place the keyboard on a dry surface with lots of room for you to keep your tools.

·        Removing the Keys

Many mechanical keyboard experts recommend removing the smaller keys first while taking out the keys from your keyboard.

Place your keyboard key remover on any one small key, like D, and push down on it very lightly until the key pullers prongs or tongs firmly hold the edge of the key from the bottom.

Once you are sure that the key puller’s prongs are firmly in place, hold the keyboard down with your non-dominant hand and pull the keys out with the dominant hand.

Remember not to pull too hard. A slight pull with the keyboard key remover’s help will make the key pop out of the keyboard.

Don’t remove the bigger keys like the space bar, Enter and shift unless necessary. The bigger keys are more sensitive when it comes to removal, so there’s a higher risk of them getting damaged.

But if, for any reason, you have to take the bigger keys out, too, use a wired keyboard key remover as its prongs can open wide to accommodate their larger size.

Pull out the big key very slightly and once it’s loose, remove the keyboard key remover from its frame and place it on the side. Then push the big key from one side so that it dislodges from its plastic supports. Then pull them off and store them with the other keys.

When removing the spacebar, you might have to use two keyboard key removers together to apply a uniform force on both sides of the spacebar and pull it out smoothly. Follow the same procedure as mentioned above after you have loosened the key with keycap pullers.

EndNote

All ardent mechanical keyboard users use a mechanical keyboard key remover for removing the keys on their keyboard. Of course, you have other options for doing the same job, like a butter knife, but these random tools may ruin your keyboard keycaps and damage their switches beyond repair.

To effectively use a mechanical keyboard key remover, it is vital to get a key remover that you can easily use and is best for your keyboard and its switches. Most mechanical keyboard professionals always remove the smaller keys first, removing the bigger keys last. Or they don’t remove the bigger keys at all because they can be damaged relatively easily.

In any case, whether you are removing just the smaller keys or the bigger ones as well, a keycap puller will expedite the key removal process while ensuring the wellbeing of your keyboard.

For More Information Contact Us Today!

You May Also Read: Keyboard Key Remover: How to Clean a Mechanical Keyboard